iFI Audio : Nano iDSD Black Label
฿8,990.00
- คำอธิบาย
- บทวิจารณ์ (0)
คำอธิบาย
Res’ing it up!
The nano iDSD Black Label plays Hi-Res audio up to DSD256
so you can enjoy your tunes in the original format just as the artists intended.
Getting into MQA? The nano BL is MQA ready. Use it with Tidal Masters on your computer or Android mobile.
Brilliant balancing act
The iFi exclusive S-Balanced circuit provides all the benefits of balanced outputs such as low-noise and less distortion when used with headphones and IEMs fitted with balanced wiring.
For single-ended headphones, S-Balanced cuts crosstalk in half. The benefits are ‘clearly’ audible.
The Burr-Brown True Native® chipset means file formats remain unchanged. Listen to music as the artist intended in the format in which it was recorded.
Hi-Res True Native® playback of all music formats from MP3 to DSD256, PCM384 and DXD384.
Listen to Master Quality Authenticated audio straight out of the box. Connect to Tidal Masters and check the option to stream MQA.
Our video tutorials on You Tube show you how.
iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.
See our Tech Note to dig deeper.
This precise, analogue volume control is normally found on items at a much higher price point. Its transparent sonic nature delivers a smooth sound with no loss in music retrieval. It delivers the sonic goods.
Zero Jitter® equals good audio. Is it essential to have a very precisely buffered digital signal before it goes to a DAC.
We pushed the envelope even further by doing this not only with the nano iDSD BL‘s USB input, but the rest of the digital interfaces as well.
This unit has up to 10 hours of non-stop playing time. Always make sure you switch it on first and then plug in your device.
Specifications
General |
|
| Input(rear): | USB2.0 type A ‘OTG’ Socket (with iPurifier® technology built-in) |
| Output(rear)； | 1 x audio fixed line out L+R 3.5mm |
| Digital Filter: | 2 positions. 2 filters |
| Outputs(front): | 2 x 3.5mm headphone audio outputs. ‘Direct’ and ‘iEMatch®’ |
DAC |
|
| DAC: | DSD, DXD, PCM DAC by Burr Brown Bit-Perfect DSD processing, Bit-Perfect DXD processing |
| Clock: | Low-jitter crystal clock |
| Audio Formats: | DSD 256/128/64/12.4/11.2/6.2/5.6/3.1/2.8 |
| DXD 384/352.8kHz | |
| PCM 384/352.8/192/176.4/96/88.2/48/44.1kHz | |
| MQA 88.2/96/176.4/192kHz filters | |
| Filter–PCM: | Listen (transient optimised minimum phase) |
| Measure (frequency response optmised) | |
| –DSD: | Listen (extended bandwidth transient optimised) |
| Measure (narrow bandwidth, low output band noise optimised) | |
| –DXD: | Fixed Bit-Perfect Processing |
| –MQA: | Fixed MQA Filter |
Headphone Amplifier |
|
| Amplifier: | Dual Mono 2 x 285mW Direct Drive, coupling capacitor free circuit for highest fidelity |
| Volume Control: | 3.5mm TRRS with Balanced compatible wiring |
| Dynamic Range(including DAC): | > 109dB(A) @ 3v (Direct) |
| > 107dB(A) @ 0.5V (iEMatch®) | |
| THD &N (@ 125mW/30R): | < 0.005% |
| Max. Output (<10% THD): | > 3.5V @ 600Ω Load (Direct) (20mW/600Ω) |
| > 2.9V @ 30Ω Load (Direct) (285mW/30Ω) | |
| > 1.7V @ 15Ω Load (Direct) (200mW/15Ω) | |
| Output Impedance : | < = 1Ω (Direct) |
| < = 4Ω (iEMatchsup>®) | |
| Channel Separation: | > 79dB @ 600Ω Load (Direct) |
| > 79dB @ 15Ω Load (Direct) (1kHz, TRRS plug Balanced wiring) | |
Line Output |
|
| Dynamic Range(Line): | > 109dB(A) |
| THD & N(0dBFS Line): | < 0.004% |
| Output Voltage(Line): : | 2.15V (+/-0.05V) |
| Output Impedance: | < 240Ω |
| Channel Separation: | > 99dB (@ 1kHz) |
| Jitter(correlated): | Below test set limit |
| Dimensions: | 96(l) x 64(w) x 25.5(h)mm |
| Weight: | 139g (0.31 Ibs) |
| Warranty period: | 12 months |
รีวิว
ยังไม่มีบทวิจารณ์